SPECIES overview

Photon energy30 - 1500 eV
PolarizationsLinear horizontal
Linear vertical (energy minimum approx. 45 eV)
Circular (under commissioning)
Resolving powerTypically about 5000 (at 400 eV).
Under special circumstances up to 10 000
Spot sizeAPXPS: about 100 µm x 100 µm
RIXS: about 5 µm x 25 µm

More information on beamline optics and experimental stations pages.

 

APXPS proposal submission.

As there are two complimentary APXPS beamlines at MAX IV, many proposals could be carried out at either HIPPIE or SPECIES. Such proposals can therefore be submitted with a preference of beamline, which is recommended if a proposal would benefit from specific capabilities of either beamline (e.g. photon or sample environment requirements), or without a preference in which case the proposal will be considered for both beamlines.

At SPECIES the APXPS endstation offers to users:

  • Standard ambient pressure cell for catalysis, redox chemistry, etc. research. Maximum pressure about 20 mbar, maximum temperature about 600 C
  • ALD ambient pressure cell for ALD-type research. Maximum pressure about 20 mbar, maximum substrate temperature about 400 C
  • UHV sample preparation tools: please see the experimental station page
  • Experimental methods available: XPS, UPS, AES, NEXAFS (partial electron yield mode using the electron analyzer, or drain current in UHV)
  • Infrastructure for wide-ranges of sample preparation is available in the adjacent facilities in the laboratory (Chemistry labs, Microscopy labs).

Fast Access

Since VT-22 SPECIES-APXPS opens up a new type of access – Fast Access – to allow short-notice proposals for short experiments. This type of access can be used for both feasibility studies and very short scientific experiments. Maximum 6 shifts (24 hrs) can be allocated for a single proposal. Only the standard ambient pressure cell is offered for this type of access, and only during certain pre-defined time. Please contact beamline personnel for current schedule. The cell is offered with full functionality, however, the cleanliness cannot be guaranteed as it is not baked in between measurements.

For information how to apply for the fast access, please visit Fast Access call page

Next available slot for fast access measurements: Week 48, 2022
Deadline for submissions: At least 3 weeks before desired date of experiment

Scanning probe microscopy

If your experiment would benefit from UHV scanning probe microscopy (STM or NC-AFM) of your surfaces, samples from SPECIES can be transferred via vacuum suitcase to an Omicron VT SPM. For more information, refer to the Scanning Probe Microscopy lab webpages. Please also contact beamline staff if this is required for your experiment. Using this option requires adding “SPM-lab” as a second beamline to your proposal.

RIXS proposal submission

MAX IV offers two beamlines for reserach using the RIXS technique. The Veritas beamline offers complementary experimental techniques.

At SPECIES the RIXS endstation offers to users:

  • High-resolution RIXS of solids, liquids, vapors, and gases using the GRACE and PGS spectrometers
  • Endstation is current under construction/commissioning

 

 

 

Data access

Experimental data is generally stored on the networked servers. Information on how to obtain the data is available on this website. Please ask beamline staff for more info.